EATON WEATHERHEAD 10Z-510 Crimp Fitting, 5/8" I.D., 7/8", M, JIC

Description

Hydraulic
Crimp Fitting, For Hose Dash Size -10, For Use With Hose Series EC110;
EC115; EC118; EC210; EC215; H104; H0105 (-06 through -12; -20); H0106
(-04 through -10); H115 (-04 through -20); H116 (-04; -06; -08); H145;
H145R; H190; H190H; H245; H245L; H265 (-04; -06; -08; -12; -16); H275
(-04 through -16); H280; H290; H290H; H290L; H345, For Hose I.D. 5/8 in,
Thread Size 7/8 In.-14, Fitting Shape Straight, Rigid, Vacuum Rating
Not Rated, Thread Type JIC, Hose Fitting A Gender Male
Crimp
hose fittings are used for general purpose industrial and hydraulic
applications with low-, medium-, and high-pressure transfer of
petroleum- and water-based hydraulic fluids. They connect Eaton
Weatherhead series hydraulic hoses to compatible JIC (Joint Industry
Council) threaded equipment or hoses. Made of carbon steel, they are
stronger than steel hydraulic hose fittings and provide good wear
resistance in applications where corrosion is not a concern. These
fittings are secured using an Eaton crimping device for a permanent
connection.Crimp hydraulic hose fittings with JIC connection join
hydraulic hoses to compatible JIC (Joint Industry Council) threaded
equipment or hoses. They have a crimped end that attaches to hydraulic
hoses and a JIC threaded end that attaches to equipment or other hoses. A
crimping device seals the fitting for a permanent connection. These
fittings have a 37 Degrees flare seat and straight threads that form a
tight seal when joined to the opposite gender. They are often used in
high-pressure applications to convey hydraulic fluids, lubricating oils,
and fuel in custom hydraulic hose assemblies.