12 volt 20 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive

Description

12 volt 20 Amp DC Auto Reset Circuit Breaker Type 1 for Wind,
Solar, Automotive
12Volt 20Amp DC Auto Reset Circuit Breaker Type 1
You are bidding on one 12V 20A DC Auto Reset Circuit Breaker
(Single Pole Thermal Type 1 Breaker)
This product is designed to allow a current under 20 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored.
Additional Info:
An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected.  These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of  applications including wind and solar but not limited to automotive, trucks and buses.
Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.
Operating temperature: -10° F to 150° F.
Storage temperature: -20° F to 200° F.
Engineered for durability.
Breakers include nuts and washers.
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier – USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
12Volt 20Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 20A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 20 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info: An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. —Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools. —Operating temperature: -10° F to 150° F. —Storage temperature: -20° F to 200° F. —Engineered for durability. —Breakers include nuts and washers.
12 volt 20 Amp DC Auto Reset Circuit Breaker Type 1 for Wind,
Solar, Automotive
12Volt 20Amp DC Auto Reset Circuit Breaker Type 1
You are bidding on one 12V 20A DC Auto Reset Circuit Breaker
(Single Pole Thermal Type 1 Breaker)
This product is designed to allow a current under 20 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored.
Additional Info:
An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected.  These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of  applications including wind and solar but not limited to automotive, trucks and buses.
Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.
Operating temperature: -10° F to 150° F.
Storage temperature: -20° F to 200° F.
Engineered for durability.
Breakers include nuts and washers.
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier – USA
UP TO 50% DISCOUNTS
TOP BRANDS
See our other items
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Thank you for visiting our Ebay store!
12Volt 20Amp DC Auto Reset Circuit Breaker Type 1
You are bidding on one 12V 20A DC Auto Reset Circuit Breaker
(Single Pole Thermal Type 1 Breaker)
This product is designed to allow a current under 20 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored.
Additional Info:
An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected.  These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of  applications including wind and solar but not limited to automotive, trucks and buses.
Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.
Operating temperature: -10° F to 150° F.
Storage temperature: -20° F to 200° F.
Engineered for durability.
Breakers include nuts and washers.